Martin MAC Encore™ Performance
Posted on Thursday, September 21st, 2017
HARMAN Professional Solutions announces the launch and availability of Martin MAC Encore™ Performance, a full-featured, LED moving head designed to produce premium white light in a wide variety of applications where critical lighting is required. MAC Encore Performance is available in two dedicated colour temperature variants: WRM for unparalleled, 3000 K warm incandescent emulation and CLD for crisp, 6000 K neutral daylight.
- MAC Encore™ Performance CLD integrates cutting-edge LED technology with a proprietary and innovative light engine carefully engineered to generate pristine, full spectrum light with ultra-high color rendition. The feature-packed moving head offers unparalleled 6000 K crisp, neutral daylight. Its advanced color mixing system delivers the full palette from smooth and subtle pastels to rich.
- Oct 22, 2020 MAC Encore™ Performance CLD integrates cutting-edge LED technology with a proprietary and innovative light engine carefully engineered to generate pristine, full spectrum light with ultra-high color rendition. The feature-packed moving head offers unparalleled 6000 K crisp, neutral daylight.
MAC Encore Performance integrates cutting-edge LED technology with a proprietary and innovative light engine that has been carefully engineered to generate pristine, full spectrum light with ultra-high colour rendition. This is all housed in a cleverly cooled and packed optical design.
The Olivier Theatre alone now hosts 16 MAC Encore Performance CLD, 31 MAC Encore Performance WRM and 32 MAC Encore Wash WRM - installed both above stage and front of house. “Our biggest change was 18 months ago when we swapped the TW1 at FOH for WRM Encore Performances and that gave us a lot more control of the lighting than previously.”. MAC Encore™ Performance CLD and WRM Safety and Installation Manual. Dimensions All measurements are given in millimeters 550 254 585 238 452 724 733 Information.
The MAC Encore Performance weaves together coveted features and dynamic effects including vibrant CMY colour mixing, ultra-slow gobo rotation, Animotion™ FX system for 3D beam animations, smooth colour temperature correction, dimming to full blackout, and variable frost. And it performs them all with extreme speed and accuracy of movement, precise framing shutters, all in a record-breaking, low noise engine.
“With the introduction of two dedicated engines for pristine cold and warm white light found in MAC Encore Performance, we are not only solidifying our industry-leading position in LED technology, we are also offering a premium alternative to the one-size-fits-all solutions we see in the stage lighting market,” said Markus Klüsener, Product Manager—Stage Lighting, HARMAN Professional Solutions.
Both the CLD and WRM variants of Martin MAC Encore Performance are now available. Contact your HARMAN representative for ordering information. A MAC Encore line extension is planned for early 2018 to include wash fixtures in CLD and WRM variants.
For more information, please visit: martin.com/macencore
Montag, 08 Januar 2018 00:00Martin MAC Encore performance CLD & WRM LED
The Martin Professional MAC Encore Performance is a full-feature framing fixture that delivers light output quality and consistent performance levels never before seen in a LED based stage lighting unit. The fixture is available in two dedicated color temperature variants, warm and cold.
The warm unit perfectly emulates a real incandescent source whilst the cold unit delivers crisp and neutral daylight. Both fixture variants produce the best available full spectrum light, combined with very high CRI, TM-30 and TLCI values.
All of this comes in the smallest and most compact product, with the lowest weight compared to other fixtures used in the area where quality of light is key to the performance. Yet, the MAC Encore™ Performance offers an un-compromised feature set accompanied with Martin´s renowned tour-proven build quality.
Description Martin MAC Encore WRM:
• Pure white LED engine with 3000 K CCT
• A flat field without color temperature variation during zoom and dimming.
• Flicker-free operation—LED driver frequency suitable for all camera applications.
• Ultra-low noise—Combines convection and forced air cooling with user-selectable output vs. sound level control.
• Fully electronic dimmer/shutter control with various dimming curves and tungsten red-shift emulation.
• Vibrant CMY color mixing with a superior palette of colors ranging from light and smooth pastel shades to rich, saturated primaries.
• Variable CTB—tungsten to daylight CCT control and expansion of the CMY palette that stays true to the black body curve.
• Color wheel—6 interchangeable dichroic filters + open.
• 1:4 zoom—precise and fast, silent zoom with auto- linked focus.
• Four framing shutter blades with individual +/- 30° adjustment and entire system rotation of +/- 55° allow for high-precision cue repeats.
• Five rotating glass gobos with next to zero focal separation from the framing system.
• Animation wheel with continuous multi-directional rotation and indexing with variable angle, speed and direction.
• Animotion™ FX System—internal dimming effect macros for stunning 3D mid-air and projection effects.
• Precise and tight iris with adjustable dynamic effects.
• Soft frost—a light frost that leaves gobo artwork and framed images visible with a beautiful soft edge.
• Heavy frost available as an optional accessory.
• Super precise and silent pan/tilt movement and positioning due to 3-phase stepper motor technology and absolute position monitoring.
Mac Encore Cld
Physical Length: 452 mm (17.8 in.)
Width (across yoke): 480 mm (18.9 in.)
Height (maximum): 740 mm (29.2 in.)
Height (head straight up): 731 mm (28.8 in.)
Weight: 31 kg (68.4 lbs.)
Minimum center-to-center distance in side-by-side installation: 700 mm (27.6 in.)
Color mixing: CMY, independently variable 0 - 100%
Color temperature control: Variable 3000 - 7000K
Color wheel: 6 x interchangeable dichroic filters + open, indexing, continuous rotation, random color
Rotating gobo wheel: 5 x interchangeable texture/breakup gobos + open, indexing, continuous rotation and shake
Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with variable speed and direction
Framing: Rotatable framing module, +/- 55°, 4 x individually controllable blades with variable angle and position
Iris: Variable 0 - 100%
Frost: Variable 0 - 100%
Dimmer/shutter: 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout
Dimming options: Choice of four dimming curvesPre-programmed effects: Two ranges of FX, independent or synchronized/combined
Focus: Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity
Zoom: Motorized
Pan: 540°
Tilt: 268°
Position correction system: Absolute position monitoring
DMX channels: 38
Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX
16-bit control: Dimming, rotating gobos, zoom, focus, pan and tilt
Movement control options: Tracking and vector
Fixture identification: User-settable ID number
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Transceiver: Opto-isolated RS-485
Fixture software update: USB memory device or over DMX link
Light source: 3000 K white LEDs
Total LED engine power: 468W
Minimum LED lifetime: 50 000 hours (to >80% luminous output)*
Zoom range: 12° - 48° one-tenth peak (1:4)
*Figure obtained under manufacturer's test conditions
Light engine luminous output: ≥ 31 500 lumens
Fixture luminous output: 9200 lumens
CRI (Color Rendering Index): >90
CQS (Color Quality Scale): >90
TM-30 Rf (IES TM-30-15 Fidelity Index): >90
TM-30 Rg (IES TM-30-15 Gamut Index): >98
TLCI (Television Lighting Consistency Index): >90
Color: Black
AC power input: Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector)
DMX and RDM data in/out: 5-pin locking XLR
AC power: 120-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Power consumption, all effects static, zero light output: 64W
Half-cycle RMS inrush curent at 230 V, 50 Hz: 10.3 A
120 V, 60 Hz: 5.0 A, 596 W, PF 0.998
208 V, 60 Hz: 2.9 A, 581 W, PF 0.988
230 V, 50 Hz: 2.6 A, 580 W, PF 0.981
240 V, 50 Hz: 2.2 A, 585 W, PF 0.979
Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity.
Allow for a deviation of +/- 10%. PF = power factor
Cooling: Combined convection and forced air (temperature-regulated, low noise, user-definable levels)
Maximum surface temperature, steady state, Ta=40° C: 75° C (167° F)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr
The rental price* of the Martin MAC Encore WRM LED is €140,- p.piece/p.day.
Description Martin MAC Encore CLD:
- Pure white LED engine with 6000 K CCT
- A flat field without color temperature variation during zoom and dimming.
- Flicker-free operation—LED driver frequency suitable for all camera applications.
- Ultra-low noise—Combines convection and forced air cooling with user-selectable output vs. sound level control.
- Fully electronic dimmer/shutter control with various dimming curves and tungsten red-shift emulation.
- Vibrant CMY color mixing with a superior palette of colors ranging from light and smooth pastel shades to rich, saturated primaries.
- Variable CTO—daylight to tungsten CCT control and expansion of the CMY palette that stays true to the black body curve.
- Color wheel—6 interchangeable dichroic filters + open.
- 1:4 zoom—precise and fast, silent zoom with auto- linked focus.
- Four framing shutter blades with individual +/- 30° adjustment and entire system rotation of +/- 55° allow for high-precision cue repeats.
- Five rotating glass gobos with next to zero focal separation from the framing system.
- Animation wheel with continuous multi-directional rotation and indexing with variable angle, speed and direction.
- Animotion™ FX System—internal dimming effect macros for stunning 3D mid-air and projection effects.
- Precise and tight iris with adjustable dynamic effects.
- Soft frost—a light frost that leaves gobo artwork and framed images visible with a beautiful soft edge.
- Heavy frost available as an optional accessory.
- Super precise and silent pan/tilt movement and positioning due to 3-phase stepper motor technology and absolute position monitoring.
Physical Length: 452 mm (17.8 in.)
Width (across yoke): 480 mm (18.9 in.)
Height (maximum): 740 mm (29.2 in.)
Height (head straight up): 731 mm (28.8 in.)
Weight: 31 kg (68.4 lbs.)
Minimum center-to-center distance in side-by-side installation: 700 mm (27.6 in.)
Color mixing: CMY, independently variable 0 - 100%
Color temperature control: Variable 6000 - 2700K
Color wheel: 6 x interchangeable dichroic filters + open, indexing, continuous rotation, random color
Rotating gobo wheel: 5 x interchangeable texture/breakup gobos + open, indexing, continuous rotation and shake
Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with variable speed and direction
Framing: Rotatable framing module, +/- 55°, 4 x individually controllable blades with variable angle and position
Iris: Variable 0 - 100%
Frost: Variable 0 - 100%
Dimmer/shutter: 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout
Dimming options: Choice of four dimming curves
Pre-programmed effects: Two ranges of FX, independent or synchronized/combined
Focus: Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity
Zoom: Motorized
Pan: 540°
Tilt: 268° Position correction system: Absolute position monitoring
DMX channels: 38
Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX
16-bit control: Dimming, rotating gobos, zoom, focus, pan and tilt
Movement control options: Tracking and vector
Fixture identification: User-settable ID number
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Transceiver: Opto-isolated RS-485
Fixture software update: USB memory device or over DMX link
Light source: 6000 K white LEDs
Total LED engine power: 468W
Minimum LED lifetime: 50 000 hours (to >80% luminous output)*
Zoom range: 12° - 48° one-tenth peak (1:4)
*Figure obtained under manufacturer's test conditions
Light engine luminous output: ≥ 31 500 lumens
Fixture luminous output: 9200 lumens
CRI (Color Rendering Index): >90
CQS (Color Quality Scale): >90
TM-30 Rf (IES TM-30-15 Fidelity Index): >90
TM-30 Rg (IES TM-30-15 Gamut Index): >98
TLCI (Television Lighting Consistency Index): >90
Color: Black
AC power input: Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector)
DMX and RDM data in/out: 5-pin locking XLR
AC power: 120-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Power consumption, all effects static, zero light output: 64W
Half-cycle RMS inrush curent at 230 V, 50 Hz: 10.3 A
120 V, 60 Hz: 5.0 A, 596 W, PF 0.998
208 V, 60 Hz: 2.9 A, 581 W, PF 0.988
230 V, 50 Hz: 2.6 A, 580 W, PF 0.981
240 V, 50 Hz: 2.2 A, 585 W, PF 0.979
Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity.
Allow for a deviation of +/- 10%. PF = power factor
Cooling: Combined convection and forced air (temperature-regulated, low noise, user-definable levels)
Maximum surface temperature, steady state, Ta=40° C: 75° C (167° F)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr
Mac Encore Cld Manual Download Block Master
The rental price* of the Martin MAC Encore CLD LED is €140,- p.piece/p.day.
For availability and up to date rental prices please download our price list HERE or contact our specialists at +31 026 325 5392.
Mac Encore Wash Cld
Preisliste (PDF)
Kontakt
Niederlassung Castrop-Rauxel
| Telefon: | +49 (0)2305 970 3004 |
| Email: | office.castrop@rentall.eu |
| Adresse: | Am Förderturm 16 |
Niederlassung Nürnberg
| Telefon: | +49 (0)9114 505 313 |
| Email: | office.nuernberg@rentall.eu |
| Adresse: | Klingenhofstraße 50 |